KArc3d

kds-plugin-document / Exports / KArc3d

Interface: KArc3d

KArc3d类代表三维空间中的一个圆弧。

The KArc3d class represents an arc in 3d space.

Hierarchy

• KBoundedCurve3d

  ↳ KArc3d

Table of contents

Properties

• arcAngle
• center
• circle
• endAngle
• endPoint
• length
• middlePoint
• normal
• radius
• startAngle
• startPoint

Methods

• clone
• getApproximatePointsByAngle
• getApproximatePointsByRatio
• getApproximatePointsBySagitta
• getApproximatePointsInfoByNormalTol
• getApproximatePointsInfoByRatio
• getClosestPoint
• getCurvatureVector
• getInterval
• getParam
• getPoint
• getTangent
• getType
• isEqual
• isPointOnCurve
• regularize
• reverse
• splitByPoint
• splitByPoints
• transform

Properties

arcAngle

• Readonly arcAngle: number

获取圆弧的角度跨度。

Get the sweep angle of the arc.

Defined in

api.d.ts:7230

---

center

• Readonly center: KPoint3d

获得圆弧的圆心。

Get arc's circle center.

Defined in

api.d.ts:7194

---

circle

• Readonly circle: KCircle3d

获取圆弧所在的圆。

Get the circle of the arc.

Defined in

api.d.ts:7236

---

endAngle

• Readonly endAngle: number

获得圆弧的终止角。

Get arc's end angle.

Defined in

api.d.ts:7224

---

endPoint

• Readonly endPoint: KPoint3d

获得轮廓线的终点。

Get bounded curve's end point.

Inherited from

KBoundedCurve3d.endPoint

Defined in

api.d.ts:7471

---

length

• Readonly length: number

获得轮廓线的长度。

Get bounded curve's length.

Inherited from

KBoundedCurve3d.length

Defined in

api.d.ts:7483

---

middlePoint

• Readonly middlePoint: KPoint3d

获得圆弧的中点。

Get arc's middle point.

Overrides

KBoundedCurve3d.middlePoint

Defined in

api.d.ts:7212

---

normal

• Readonly normal: KVector3d

获得圆弧的法向量。

Get arc's circle normal.

Defined in

api.d.ts:7200

---

radius

• Readonly radius: number

获得圆弧的半径。

Get arc's circle radius.

Defined in

api.d.ts:7206

---

startAngle

• Readonly startAngle: number

获得圆弧的起始角。

Get arc's start angle.

Defined in

api.d.ts:7218

---

startPoint

• Readonly startPoint: KPoint3d

获得轮廓线的起点。

Get bounded curve's start point.

Inherited from

KBoundedCurve3d.startPoint

Defined in

api.d.ts:7465

Methods

clone

▸ clone(): KCurve3d

复制一个当前曲线。

Return the cloned curve of this.

Returns

KCurve3d

复制的曲线。

The cloned curve.

Inherited from

KBoundedCurve3d.clone

Defined in

api.d.ts:8425

---

getApproximatePointsByAngle

▸ getApproximatePointsByAngle(angleSpan?): KPoint3d[]

按给定圆心角对当前圆弧进行离散。

Discretize the Arc to points with specified angle.

Parameters

Name	Type	Description
angleSpan?	number	圆心角（以弧度为单位）。 如果没有输入角度值或者输入值过小（<1.0e-6），则默认使用PI/60个弧度。 Central angle span in radians. If angleSpan is not provided or the value is too small(<1.0e-6), then it will use default value PI/60.

Returns

KPoint3d[]

离散点列。

The discretized points.

Defined in

api.d.ts:7325

---

getApproximatePointsByRatio

▸ getApproximatePointsByRatio(ratio?): KPoint3d[]

对当前圆弧进行离散，保证相邻两点之间的弦高和弦长之比小于给定的比例值。

Discretize the Arc to points with specified ratio between sagitta and chord length.

Parameters

Name	Type	Description
ratio?	number	相邻两点之间圆弧段的弦高和弦长之比。 如果没有输入弦高和弦长比例值或者输入值不在（0，1）之间，则默认会采用PI/60为刻度去离散圆弧。 ratio = sagitta / chord length. If ratio is not provided or the value is not between (0,1), then it will use step = PI/60 radians to discretize the arc.

Returns

KPoint3d[]

离散点列。

The discretized points.

Defined in

api.d.ts:7292

---

getApproximatePointsBySagitta

▸ getApproximatePointsBySagitta(sagitta?): KPoint3d[]

对当前圆弧进行离散，保证相邻两点之间的弦高小于给定值。

Discretize the Arc to points with specified sagitta.

Parameters

Name	Type	Description
sagitta?	number	相邻两点之间圆弧段的弦高。 如果没有输入弦高值、输入值过小（<1.0e-6）或者过大（> Radius-1.0e-6），则默认会采用PI/60为刻度去离散圆弧。 The sagitta between two adjacent points. If sagitta is not provided or the value is too small(<1.0e-6) or big(> Radius-1.0e-6), then it will use step = PI/60 radians to discretize the arc.

Returns

KPoint3d[]

离散点列。

The discretized points.

Defined in

api.d.ts:7309

---

getApproximatePointsInfoByNormalTol

▸ getApproximatePointsInfoByNormalTol(normTol?, areaTol?): Object

对当前有界曲线进行离散，保证相邻两点之间的法向夹角小于给定值，相邻两点之间的曲线段和弦之间的近似三角形面积小于给定值。

Discretize bounded curve to points with specified normal tolerance and area tolerance.

Parameters

Name	Type	Description
normTol?	number	相邻两点之间法向夹角误差（angle < acos(1-normTol)）。 如果没有输入法向误差值或者输入值过小（<1.0e-6）或者过大（>1.0 - 1.0e-6），则默认会采用0.01。 The normal tolerance between two adjacent points (angle < acos(1-normTol)). If normTol is not provided or the value is too small(<1.0e-6) or too big(>1.0 - 1.0e-6), then it will use default value 0.01.
areaTol?	number	相邻两点之间的曲线段和弦之间的近似三角形面积。 如果没有输入面积值或者面积值过小（<1.0e-6）, 则不使用面积误差作为判断条件。 The approximate area between the bounded curve and the chord of two adjacent points. If the area is not provided or the vlaue is too small(<1.0e-6), then the check condition will not use the area.

Returns

Object

离散点列和它们的参数值。

The approximate points info which contains the point locations and parameters.

Name	Type
params	number[]
points	KPoint3d[]

Inherited from

KBoundedCurve3d.getApproximatePointsInfoByNormalTol

Defined in

api.d.ts:7527

---

getApproximatePointsInfoByRatio

▸ getApproximatePointsInfoByRatio(ratio?, areaTol?): Object

对当前有界曲线进行离散，保证相邻两点之间的弦高和弦长之比小于给定的比例值，相邻两点之间的曲线段和弦之间的近似三角形面积小于给定值。

Discretize bounded curve to points with specified ratio and area tolerance.

Parameters

Name	Type	Description
ratio?	number	相邻两点之间曲线段的弦高和弦长之比。 如果没有输入弦高和弦长比例值或者输入值不在（0，1）之间，则默认会采用0.1。 ratio = sagitta / chord length. If ratio is not provided or the value is not between (0,1), then it will use ratio = 0.1 to discretize the bounded curve.
areaTol?	number	相邻两点之间的曲线段和弦之间的近似三角形面积。 如果没有输入面积值或者面积值过小（<1.0e-6）, 则不使用面积误差作为判断条件。 The approximate area between the bounded curve and the chord of two adjacent points. If the area is not provided or the vlaue is too small(<1.0e-6), then the check condition will not use the area.

Returns

Object

离散点列和它们的参数值。

The approximate points info which contains the point locations and parameters.

Name	Type
params	number[]
points	KPoint3d[]

Inherited from

KBoundedCurve3d.getApproximatePointsInfoByRatio

Defined in

api.d.ts:7505

---

getClosestPoint

▸ getClosestPoint(point, tolerance?): KPoint3d

获得在指定容差下曲线上距离传入点最近的一点。

Get the closest point on curve for the input point with specified tolerance.

Parameters

Name	Type	Description
point	KPoint3d	传入点。 The input point.
tolerance?	number	指定容差，默认容差是1e-6。 The specified tolerance.The default value is 1e-6.

Returns

KPoint3d

最近点。

The closest point.

Inherited from

KBoundedCurve3d.getClosestPoint

Defined in

api.d.ts:8397

---

getCurvatureVector

▸ getCurvatureVector(point): KVector3d

求曲线上某点处的曲率向量。

Get curve's curvature vector for the input point on the curve.

Parameters

Name	Type	Description
point	KPoint3d	曲线上一点。 A point on curve.

Returns

KVector3d

曲率向量。 向量的模为曲率值，向量的方向为曲率方向。

A curvature vector. Its norm represents the curvature value. Its direction represents the curvature's direction.

Inherited from

KBoundedCurve3d.getCurvatureVector

Defined in

api.d.ts:8447

---

getInterval

▸ getInterval(): KInterval

获取曲线的参数域区间。

Get the parameter interval of the curve.

Returns

KInterval

曲线的参数域区间。

The parameter interval of the curve.

Inherited from

KBoundedCurve3d.getInterval

Defined in

api.d.ts:8319

---

getParam

▸ getParam(point): number

反求输入点对应的曲线参数值。

Get point's corresponding parameter value on the curve.

Parameters

Name	Type	Description
point	KPoint3d	曲线上的一点。 Point on curve

Returns

number

输入点对应的曲线参数值。

The corresponding parameter of the point on curve.

Inherited from

KBoundedCurve3d.getParam

Defined in

api.d.ts:8361

---

getPoint

▸ getPoint(t): KPoint3d

求曲线参数值对应的曲线上的点位置。

Get the point on the curve specified by the input parameter t.

Parameters

Name	Type	Description
t	number	参数值 Parameter value

Returns

KPoint3d

曲线参数对应的曲线上的点。

The point on the curve for the input parameter.

Inherited from

KBoundedCurve3d.getPoint

Defined in

api.d.ts:8347

---

getTangent

▸ getTangent(point): KVector3d

获得圆弧一点处的切向量。 注意：需要保证传入点在圆弧上。

Get arc's tangent vector of a point on the arc. NOTE: the caller need to make sure the point is on the arc.

Parameters

Name	Type	Description
point	KPoint3d	圆弧上一点。 A point on the arc.

Returns

KVector3d

切向量。

The tangent vector.

Defined in

api.d.ts:7252

---

getType

▸ getType(): KCurve3dType

获得曲线的类型。

Get the curve's type.

Returns

KCurve3dType

曲线的类型。

The curve's type.

Inherited from

KBoundedCurve3d.getType

Defined in

api.d.ts:8309

---

isEqual

▸ isEqual(other, tolerance?): boolean

检查两个曲线在指定容差下是否相等。

Check whether two curves are equal with specified tolerance.

Parameters

Name	Type	Description
other	KCurve3d	要比对的曲线。 The curve to compare this curve with.
tolerance?	number	指定容差，默认容差是1e-6。 The specified tolerance.The default value is 1e-6.

Returns

boolean

如果相等返回true。

Return true if equal, otherwise return false.

Inherited from

KBoundedCurve3d.isEqual

Defined in

api.d.ts:8415

---

isPointOnCurve

▸ isPointOnCurve(point, tolerance?): boolean

检查传入点在指定容差下是否位于曲线上。

Check whether the input point is on the curve or not with specified tolerance.

Parameters

Name	Type	Description
point	KPoint3d	传入点。 The input point.
tolerance?	number	指定容差，默认容差是1e-6。 The specified tolerance.The default value is 1e-6.

Returns

boolean

如果在曲线上返回true。

Return true if on the curve, otherwise return false.

Inherited from

KBoundedCurve3d.isPointOnCurve

Defined in

api.d.ts:8379

---

regularize

▸ regularize(): void

对当前圆弧重新参数化，使得起始角正好是从零开始。 也就是把圆心到圆弧起点的方向定为X轴方向，Z轴不变，相应旋转Y轴方向。

Re-parameterize the underlying circle of the current arc, so that the arc's start angle will be set to 0. Rotate the circle around its local Z axis, to align the x direction of the circle with the start point of the arc.

Returns

void

Defined in

api.d.ts:7276

---

reverse

▸ reverse(): void

把当前曲线反向。

reverse the current curve.

Returns

void

Inherited from

KBoundedCurve3d.reverse

Defined in

api.d.ts:8431

---

splitByPoint

▸ splitByPoint(point, distTol?): KBoundedCurve3d[]

把当前有界曲线按给定点分成两段。

Split the bounded curve into two segments by the given point.

Parameters

Name	Type	Description
point	KPoint3d	分割点。 split point.
distTol?	number	距离容差。如果不给定，则使用全局容差。 Distance tolerance. If not provided, then global tolerance will be used.

Returns

KBoundedCurve3d[]

多段有界曲线。 如果分割点靠近当前有界曲线的起点或者终点，则返回一条克隆曲线。

Multiple segments of bounded curves. If the split point is close to start or end point, a cloned bounded curve will be returned.

Inherited from

KBoundedCurve3d.splitByPoint

Defined in

api.d.ts:7567

---

splitByPoints

▸ splitByPoints(points, distTol?): KBoundedCurve3d[]

把当前有界曲线按给定点分成多段。

Split the bounded curve into multiple segments by the given points.

Parameters

Name	Type	Description
points	KPoint3d[]	分割点列。 split points.
distTol?	number	距离容差。如果不给定，则使用全局容差。 Distance tolerance. If not provided, then global tolerance will be used.

Returns

KBoundedCurve3d[]

多段有界曲线。 如果点列只包含起点和终点，则返回空数组。

Multiple segments of bounded curves. If points only contain start and end points, empty array will be returned.

Inherited from

KBoundedCurve3d.splitByPoints

Defined in

api.d.ts:7547

---

transform

▸ transform(matrix): boolean

对当前圆弧应用一转换矩阵，从而实现对其几何变换。 如果转换后的几何不是圆弧，将会抛出error。

Transform this arc to a new one If the new one is not a arc, it will throw an error.

Parameters

Name	Type	Description
matrix	KMatrix4	转换矩阵。 The transform matrix.

Returns

boolean

当执行正确的话，返回true；否则为false。

Return true if successful, otherwise return false.

Overrides

KBoundedCurve3d.transform

Defined in

api.d.ts:7268